Reliable Gutterglove Pro Gutter Guards for RI, MA & CT

AmeriGutter has installed gutter guards across Rhode Island, Massachusetts and Connecticut since 1997. We are the Gutterglove Pro installer for all three states. Gutterglove Pro is a professional gutter guard: stainless steel micro-mesh on an aluminum frame, sold to contractors only. Rain goes through. Leaves, pine needles and roof grit stay out. The guard carries the manufacturer's 50-year limited parts warranty. When you call, you get Brad Perry, the owner, and the crew that shows up works for us.
Family-run since 1997 · Licensed in MA #163421, RI #12545, CT #605613 · BBB A rating · Gutterglove Pro installer for RI, MA and CT

Gutterglove Pro stainless micro-mesh gutter guard installed on a colonial home in Pomfret, CT

CALL FOR A FREE ESTIMATE

What Gutterglove Pro micro-mesh gutter guards are made of

Gutterglove Pro is a fine stainless steel mesh bonded to an extruded 6063 aluminum frame. The frame sits over your existing gutter, so nothing about the gutter itself changes. Rain then drops through the mesh into the gutter. Leaves, twigs, pine needles, shingle grit and wasps stay on top, and the next wind takes most of it off. You also cannot buy it at a home center. It is installed, not dropped in.

Gutterglove makes three professional lines. Then we pick the right one for your roof during the estimate.

Frame-Reinforced Stainless Steel Micro-Mesh

The heaviest guard in the range. A continuous T6-hardened aluminum frame carries the mesh, so it takes snow load and the odd branch. So this is what we put under big oaks, pines and maples, and on roofs that hold snow into March.

Stainless Steel Micro-Mesh

The same stainless mesh on a lighter T4 aluminum rail. Gutterglove’s A-Bend shape lifts debris off the surface so it sheds. We use it near the coast and in wet, shaded yards, because stainless does not rust in salt air.

All-Aluminum

A perforated .019-gauge aluminum guard in black, white or mill finish. Gutterglove’s RiserStep design keeps water moving. In short, it is the basic protection. It suits newer neighborhoods with young trees, or anyone who wants the guard to vanish into the gutter color.

Installer fitting a Gutterglove Pro gutter guard on a shingle roof

Why RI, MA and CT homeowners pick Gutterglove Pro gutter guards

These are the reasons that come up on nearly every estimate, usually in this order.

  • Gutterglove backs the guard with a 50-year limited parts warranty.
  • The mesh is fine enough to stop pine needles, maple seeds, oak tassels and shingle grit. That is what clogs gutters here, and screens and foam let all of it through.
  • The frame is extruded aluminum, not plastic, so it holds its shape in July and in January.
  • It mounts to the gutter and fascia and stays out from under your shingles.
  • Gutterglove reports its stainless guards passed the ASTM E2768 and E84-19b fire tests.
  • Birds, squirrels and wasps also cannot nest in a gutter they cannot reach.
  • There is also a heated version for homes that fight ice every winter.
  • Our own employees install it. In other words, we do not subcontract.
  • We match the frame to your gutter color, so it does not look like an afterthought.
Clogged gutter before and Gutterglove Pro gutter guard after installation
Gutterglove Pro micro-mesh gutter guard mitered around a gutter return
Close-up of Gutterglove Pro stainless steel micro-mesh and aluminum frame

IceBreaker heated gutter guards

For roof edges that ice up every winter, we install Gutterglove’s IceBreaker heated gutter guard. A heating element inside the guard melts a channel through the ice and stops icicles over the walk. Read more on our heated gutter guards page.

Gutterglove IceBreaker heated gutter guard melting ice at the roof edge
Gutterglove IceBreaker ArmourGuard heated gutter guard warranty graphic
Roof edge clear of ice after a Gutterglove IceBreaker heated gutter guard installation
Exposed heat cable wires along a roof edge before heated gutter guards
Gutterglove IceBreaker heated gutter guard keeping a gutter clear in winter
Gutterglove IceBreaker heated gutter guard product image

Built for what falls on a New England roof

Most gutter guards are designed for mild winters and tidy trees. Ours get picked for what actually lands on a roof between Westerly and Worcester.

Gutter guards for pine needles

Pine needles are the number one clog in this region. They slide straight through a screen, then mat inside the gutter. Micro-mesh is fine enough to stop them, so they dry on top and blow off. If you are under white pines, this is the guard.

Oak tassels and maple seeds in spring

The May and June drop can fill a gutter in a week, especially under a big maple. Tassels and helicopters both stay on the mesh, and most of them are gone after the next storm.

Shingle grit from asphalt roofs

Asphalt shingles shed sand-like grit for years. New roofs shed the most, especially in the first couple of seasons. Gutterglove says the mesh resists grit clogging about 99 percent of the time. The one spot that may need a brush is the inside corner at a roof valley. We show you where yours are before we leave.

Salt air on the coast

Stainless mesh and aluminum frames do not rust. So it matters in Newport, Westerly and Narragansett, on the South Shore, and along the Connecticut shoreline.

Snow load

The Frame-Reinforced line is built to carry a roof’s worth of snow sliding onto the gutter edge. We recommend it on north-facing roofs and anywhere you have seen a gutter bend. Light screens, by contrast, fold under that weight.

Do gutter guards cause ice dams in RI, MA and CT?

No. Ice dams form when heat leaking through the roof melts snow, and the water refreezes at the cold eave. A gutter guard does not make that heat and does not stop it. Guards do not prevent ice dams either. Attic insulation and ventilation do.

Instead, what a guard changes is what happens inside the gutter. A clogged gutter holds water that freezes into a solid block and pushes ice up under the shingles. A guarded gutter stays open, so meltwater has somewhere to go.

Two things to know before winter. First, with any gutter guard, snowmelt can refreeze on the surface of the guard in a hard cold snap and form icicles. That is true of every brand on the market, and Gutterglove says so in its own FAQ. Second, if your roof edge ices every year no matter what, the fix is heat, not mesh. That is the job of the IceBreaker heated gutter guard. A heating element runs inside the guard and keeps a channel open through the ice. A licensed electrician makes the electrical connection.

How much do gutter guards cost installed in RI, MA and CT?

We quote in writing after we see the house, not over the phone. The numbers below are what most homes in RI, MA and CT actually run, so you can budget before we visit. The full breakdown is in our guide to gutter guard installation cost in RI, MA and CT.

Guard typeInstalled cost per linear footWhat you get
Foam and brush inserts$1 to $4Cheap, clog fast, replaced within a couple of years
Screens (aluminum or plastic)$2 to $5Stop leaves, let pine needles and grit through
Reverse-curve hoods$5 to $12Shed leaves; heavy rain can overshoot the lip
Micro-mesh (Gutterglove Pro)$8 to $12Stops fine debris; national branded micro-mesh runs $20 to $40 or more

Most homes here carry 120 to 200 feet of gutter, so a Gutterglove Pro install usually lands in the $1,000 to $2,500 range. The same house quoted by a national brand, however, often comes back at $3,000 to $6,000. Three things move your price: total footage, roof height, and the condition of the gutters we are covering. If a run is sagging or pulling off the fascia, we fix it first, in the same visit.

Gutterglove Pro vs LeafFilter, LeafGuard and Gutter Helmet

You will see all three national names in your mailbox. Here is how they compare on the things that matter. Every row comes from each company’s own published description.

Gutterglove Pro (AmeriGutter)LeafFilterLeafGuardGutter Helmet
Guard typeStainless steel micro-mesh on aluminum frameStainless micro-meshOne-piece reverse-curve gutter with built-in hood (replaces your gutters)Reverse-curve hood over existing gutters
Stops pine needles and gritYes (mesh)Yes (mesh)Partly (open front edge)Partly (open front edge)
Warranty as stated by the maker50-year limited partsLifetime, transferableLifetimeLifetime performance warranty
Who installsAmeriGutter employees, owner on the phoneNational brand crewsNational brand crewsLocal dealers
Price position (installed)$8 to $12 per footTypically $20 to $40+ per footFull gutter replacement pricingDealer pricing; $200-off promotions with 100 ft minimum
Sales processOwner visit, written quote, no pressureIn-home sales presentationIn-home sales presentationIn-home sales presentation

Reverse-curve hoods do well on big flat leaves and poorly on needles and grit, which is most of what falls here. Micro-mesh is still the only guard type that reliably stops both. Between micro-mesh brands, the difference is mostly who installs it, what it costs, and who answers the phone afterward.

How we install gutter guards in RI, MA and CT

  1. Brad or a senior installer walks the house, measures every run, and checks pitch, hangers and downspouts. You get a fixed price in writing. No phone estimates and no “today only” pricing.
  2. We clean out the existing gutters, reseal seams, replace failed hangers and correct the pitch, because a guard only works on a gutter that drains. If a run is past saving, we replace it with seamless 5-inch or 6-inch gutters before the guard goes on.
  3. We cut the guard to each run, fit it at the roof edge and fasten it to the gutter. Inside and outside corners get Gutterglove’s high-flow miters. Frames match the gutter color.
  4. We walk you through the finished runs and point out the valley corners worth a glance each fall. Then we register the guards with Gutterglove so the warranty starts on day one. Gutterglove sends a free Gutter Guard Brush with registration; Gutterglove charges the shipping.

Most single-story homes are done in a day, though larger or steeper homes may take two to three. You do not pay until the job is finished and you are satisfied.

Warranty on Gutterglove Pro gutter guards

Gutterglove's 50-year limited parts warranty

Every Gutterglove Pro guard carries the manufacturer’s 50-year limited parts warranty against defective parts. We also register it for you.

AmeriGutter's five-year workmanship guarantee

We warranty our own installation and craftsmanship for five years. If a guard we installed comes loose, we come back and fix it.

No money up front. You do not pay until the job is finished and you are satisfied. State law gives you three days to cancel a signed contract. In fact, we let you cancel at any time before the install.

Gutterglove Pro gutter guard reviews from RI, MA and CT homeowners

Tell us how we can help.

SMS Disclaimer: By clicking 'Get A Free Quote', you agree to Amerigutter's Terms of Use and Privacy Policy. You consent to receive phone calls and SMS messages from Amerigutter to provide updates and information in regards to your business with Amerigutter. Message frequency may vary. Message & data rates may apply. Reply STOP to opt-out of further messaging. Reply HELP for more information. See our Privacy Policy.

Call and speak directly to the owner, Brad Perry.

Brad Perry, owner of AmeriGutter, with his family

Gutter guard installation service areas

We install Gutterglove Pro across all three states from our base in northern Rhode Island. Each state also has its own crew and its own phone number.

Gutter guards in Rhode Island

Call 401-567-9343. We cover Providence, Kent, Washington, Newport and Bristol counties, including Providence, Warwick, Cranston, Smithfield, Cumberland, Lincoln, Newport and Westerly. See every Rhode Island town we serve.

Gutter guards in Massachusetts

Call 508-278-4170. We cover Bristol, Middlesex, Norfolk, Plymouth, Suffolk and Worcester counties, including Quincy, Upton, Plainville, Foxborough, Milford, Taunton, Franklin and Dedham. See every Massachusetts town we serve.

Gutter guards in Connecticut

Call 860-423-4500. We cover New London, Tolland, Windham and Hartford counties, including Norwich, New London, Groton, Stonington, Vernon, Tolland, Mansfield and Enfield. See every Connecticut town we serve.

Not sure if you are in range? Call the main line at 888-662-5644 and ask.

Gutter guard questions from RI, MA and CT homeowners

Do Gutterglove Pro gutter guards work with pine needles?

Yes. In fact, pine needles are the main reason we recommend stainless micro-mesh over screens or hoods. The mesh openings are smaller than a needle, so needles sit on top, dry out and blow away. Screens and reverse-curve hoods let needles into the gutter.

Do gutter guards cause ice dams?

No. Ice dams come from roof heat loss, not from gutters or guards. A guard does not prevent them either. What a guard does is keep the gutter itself from freezing solid with trapped water. So if your eaves ice every winter, ask about the IceBreaker heated gutter guard.

Can Gutterglove Pro be installed on my existing gutters?

In most cases, yes. Gutterglove Pro fits standard 5-inch and 6-inch K-style gutters and most gutter-to-roof setups. We clean and repair the existing gutters first, then put the guard on. If a run is beyond repair, we replace it with seamless gutter before the guard goes on.

How much does Gutterglove Pro cost installed in RI, MA or CT?

Most homes land between $1,000 and $2,500, or about $8 to $12 per linear foot installed. Footage, roof height and gutter condition move the number, so we give a fixed written price after measuring the house.

How long do Gutterglove Pro gutter guards last, and what does the warranty cover?

The stainless mesh and aluminum frame do not rust or rot, so the guard should outlast the roof under it. Gutterglove backs the guard with a 50-year limited parts warranty against defective parts. AmeriGutter covers the installation workmanship for five years.

Will I ever need to clean my gutters again?

Not the way you do now. Debris stays on top of the guard, and most of it blows off eventually. Two spots are worth a look each fall. One is the inside corner at a roof valley, where grit can collect. The other is any run under a heavy pine. A quick pass with the Gutter Guard Brush from the ground handles both.

Do micro-mesh gutter guards work in heavy rain?

Yes, on straight runs. The place any guard can overflow in a downpour is the inside corner at a roof valley. Two roof planes dump water into one spot there. So we install high-flow miters at every valley. On roofs that shed a lot of water, we recommend 6-inch gutters.

What is the difference between Gutterglove Pro and LeafFilter?

Both use stainless micro-mesh, so both stop fine debris. Gutterglove Pro is sold through contractors. AmeriGutter’s own employees install it, with the owner on the phone and a written quote from a site visit. LeafFilter sells through in-home sales presentations and is usually quoted at two to four times the price per foot.

Do you install gutter guards on 6-inch, half-round or copper gutters?

Yes to 6-inch. Gutterglove Pro comes in 5-inch and 6-inch widths. Half-round and copper gutters need a different approach, so tell us what you have and we will quote the right product. See our 6-inch seamless gutters and half round gutters pages.

Are gutter guards worth it in New England?

For most homes with trees nearby, yes. Professional cleaning runs $150 to $300 a visit, and many homes need it twice a year. So a quality guard pays for itself in four to six years, before counting the fascia rot, ice and basement water that clogged gutters cause. Cheap foam or screen guards are usually not worth it, because they clog almost as fast as an open gutter.

Can I hang Christmas lights with gutter guards?

Yes. Gutterglove makes an Exterior Light Clip that snaps onto the guard frame, so you do not have to clip into the gutter lip or the shingle edge. Ask us for a bag at install time.

Who installs the guards, your crew or subcontractors?

Our employees, every time. They are also covered under our workers’ compensation and liability insurance. We do not subcontract installations.

How long does installation take?

Most single-story homes are finished in one day, though larger, multi-story or complex rooflines can take two to three days, weather permitting.

Where can I buy Gutterglove Pro?

You cannot buy it in a store. Gutterglove Pro is a professional line installed only by authorized contractors, and AmeriGutter installs it throughout Rhode Island, Massachusetts and Connecticut. By contrast, the Gutterglove products sold at home centers (LeafBlaster Pro and Gutter Guard by Gutterglove) are the retail line, not the Pro line.